Sargent IN220 - User Manual

A8203A
04/16
Copyright 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
PoE
Cylindrical Lock
Installation Instructions
IN220

Summary

Warning

Installation Wiring

PoE Typical Application Overview

Wiring Diagram and Components

Details wiring connections for the lock, distinguishing between CI and end-user supplied parts.

Frame Harness Installation

Instructions for installing the frame harness, including cut end and hinge side connections.

PoE Data Hinge Connectors

PoE Door Harness Installation

PoE Lock Connection

Lock Installation

Prepare Door

Instructions for preparing the door, including verifying hand, bevel, and hole preparation.

Install Strike, Latchbolt, and DPS

Lock Adjustments and Lever Removal

Cylinder Change and Through-Bolt Adjustment

Through-Bolt and Door Thickness Adjustment Details

Install Lock Body

Steps for feeding the harness and sliding the lock body into the cross-bore hole.

Secure Lock To Door

Assemble Inside Trim

Outside Reader and Mounting Plate Installation

Orienting the reader, feeding the harness, and installing the reader to the door.

Reader Securing and Ground Lug Connection

Feeding cables, securing reader with through-bolts, and connecting ground lugs.

Connector Installation

Attaching DPS, 10-pin lock body, 24-pin card reader connectors, and crimping RJ45.

Secure Mounting Plate

Inside Module Component Assembly

Inserting controller tabs, aligning board-to-board connectors, and connecting RJ45.

Inside Cover Installation

Operational Check

Functionality Verification

Checking key rotation, latch retraction, inside lever operation, and credential validation.

Sargent IN220 Specifications

General

Brand	Sargent
Model	IN220
Category	Locks
Language	English