Need help?Do you have a question about the Sartorius 1401 MP8 and is the answer not in the manual?
General| Readability | 0.01 g |
|---|---|
| Calibration | External |
| Interface | RS-232 |
| Power Supply | AC Adapter |
| Operating Temperature | 10°C to 30°C |
Diagram illustrating and labeling key components of the electronic toploader.
Comprehensive specifications including weighing range, readability, and environmental limits for the toploader models.
Advises on avoiding adverse conditions like vibrations, drafts, and heat for accurate weighing results.
Itemizes the contents of the package, including the balance, pan, support, and power cable.
Crucial advice on connecting/disconnecting peripheral devices safely after powering off.
Details optional accessories such as spatulas, dust covers, and calibration weights for the toploader.
Instructions for unpacking the balance and checking/correcting the voltage selector.
Steps for removing adhesive points and fitting the protective hood onto the balance.
Guidance on installing the pan support onto the balance.
Connecting the power cable and setting the operating mode switch (Standby/On).
Procedure for the balance's autocheck and how to tare the balance to zero.
Detailed steps for calibrating the balance using the calibration button.
Steps to unlock the operating program by switching to mode 'O' and sliding the switch.
Guide to navigating and confirming parameters using the zero button.
Overview of the balance operating program for adapting the toploader to specific environments and applications.
Details various digital filter codes for adjusting filtration to normal, amplified, strong, or extreme.
Options to configure the stability range for digit display, affecting how stability is detected.
Settings for controlling decimal display, including turning last decimal on/off or showing it at stability.
Configuration options for tare mode with or without stability, and enabling/disabling Auto Zero function.
To Next Page
