16
Configuring the Balance/Scale
Setting the Parameters (Menu Codes)
You can configure your Basic
lite
balance or Gold scale to meet individual
requirements by selecting from the parameters available in the menu.
Example: Adapt the balance/scale to unstable ambient conditions:
Menu code 1 1 4
Step Key (or instruction) Display
1. Turn off the balance/scale e
2. Turn the balance/scale back on; e
while all segments t briefly
are displayed 1.
$ To navigate within a menu t 2.
level; the last menu option is repeatedly …
followed by the first option 9.
1.
3. Select the 2nd menu level p 1. 1.
4. Select the 3rd menu level p 1. 1. 2
o
5. In Menu Level 3: t 1. 1. 4
Select the desired option repeatedly
6. Confirm new setting;
the “o” indicates the currently set
option p for 2 sec. 1. 1. 4
o
$ Select the next menu level
(here: move from the 3rd to
the 1st level) p 1.
$ Set other menu codes, if desired p, t
7. Store parameter settings t
and exit operating menu for 2 sec.
or
$ Exit operating menu without
storing changes e
> Restart the application 0.0 g
To Next Page
Loading...
