Entering Numbers and Letters (without a number block)
( – Press the key less than 2 seconds: Activate character to the left of
the currently active character (when first character is active: exit the
input mode without saving changes)
– Press the key longer than 2 seconds: Exit the input mode without
saving changes
) – Press the key less than 2 seconds:
Confirm currently active character and move 1 position to
the right (after the last character: Save input)
– Press the key longer than 2 seconds: Save current input and display
the menu item
k – Cursor in first position, no characters changed yet: Delete
character(s) and enter 0
– Change the displayed character; scroll forward (sequence: 0 through
9, decimal point, minus sign, Z through A, space)
p – Cursor in first position, no characters changed yet: Delete entire
string and enter a space
– Change the displayed character; scroll backwards (sequence: Space,
A through Z, minus sign, decimal point, 9 through 0 )
Number entry for Combics 2:
Enter number values (date and time, etc.) using the 10-key numeric keypad
Menu Display
Both illustrations depict all of the main display elements and symbols that can
be shown in Menu mode.
1 Selected menu item (e.g. printer for setting the connected printer)
2 Menu history (refers to the highest menu level in the Setup menu)
3 Note that other submenus are available
Display with the “codes" language setting
4 First level in the Setup menu
5 Second level in the Setup menu
6 Third level in the Setup menu
7 Current active setting
Saving Menu Settings
The parameters selected in the menu remain saved when you switch to
weighing mode or turn off the device. You can block access to the Setup
menu by requiring a password to prevent unauthorized or accidental setting
changes (see page 38).
2
3
4 5 6 7
1
3
2
36 Operating Instructions Combics Indicators
Operating Design
To Next Page
Loading...
