or
r t Set the number of reference parts using r: 1, 2, 5, 10, 20, etc.
( t Start the calculation of the reference piece weight.
The averaging routine does not begin until the fluctuation in weight value remains
below a defined threshold over three consecutive measurements. The number of
sub-weighing operations remaining is shown in the numeric display.
t The averaging result is displayed.
p t Print the results.
Note: If automatic printout of results is enabled, you do not need to press the
p key. The results are printed automatically.
Printout configuration: see page 96.
mDef + 20
T + 0.292 kg
x-Net + 0.183 kg
--------------------
y When you unload the weighing platform, the display switches to the weight
readout automatically, unless configured otherwise in the menu. The weighing
instrument is ready for the next measurement.
66 Operating Instructions Combics Indicators
Operation
To Next Page
Loading...
Need help?
General
