111
Product Order No.
Retainer for mounting bar code scanner on floor-mounted
column, bench stand or column of Combics complete scale YBH01CWS
Plate for mounting printer on the floor-mounted column
or bench stand YPP01CWS
Set of castors for YBP03CIP/S column base,
with 2 guide castors, 2 lockable castors YRO03CI
Anti-theft locking device YTP01CI
24V industrial power supply module* YAS02CI
Connecting cable (25-contact D-Sub)
for YRB10Z battery pack (2 m) YCC02-RB01
Connecting cable with cable gland, for YRB10Z rechargeable
battery pack (2 m) (Combics CIS models only) YCC02-RB02
Connecting cable with cable gland for car battery (2 m)
(Combics CIS models only) YCC02-CB02
Connecting cable with cable gland for YBR02FC
bar code scanner (Combics CIS models only) YCC02-BR02
Connecting cable with cable gland, 9-pin D-Sub male connector,
6 m (Combics CIS models only) YCC02-D09M6
Connecting cable with cable gland, 9-contact D-Sub
female connector, 6 m (Combics CIS models only) YCC02-D09F6
Connecting cable with cable gland, 25-contact D-Sub
female connector, 6 m (Combics CIS models only) YCC02-D25F6
Connecting cable with cable gland, 12-pin round male connector,
6 m (Combics CIS models only) YCC02-R12M6
Connecting cable with cable gland, 12-contact round
female connector, 6 m (Combics CIS models only) YCC02-R12F6
Cable for YDA01C-20MA current interface, with open cable
ends; for example, 5+ = 5 m * 6906926
Cable gland for Combics model CIS, IP65/67
(Combics CIS models only) YAS04CIS
Connecting an IS Weighing Platform to a Combics 2 Indicator
You can connect an IS weighing platform for use as WP2.
Features:
– IS weighing platforms process weighing data independently
of the indicator.
– IS weighing platforms can be internally calibrated/adjusted.
– IS...-0CE models have a separate approval number, printed on
a tag that is affixed to the cable.
– Please observe the conditions described in the manual for the
weighing platform you connect.
* not for use in legal metrology
To Next Page
Loading...