Sartorius CIS1 - Configuration: Operating Menu Parameters (Basic Weighing); Basic Weighing Function Parameters

Operating Menu Overview (Parameters)
= Setting/function available on Combics 1 plus only
= Setting/function available on Combics 2 only
= Setting/function available on Combics 1 plus and Combics 2 only
* Factory setting
Menu
Appl Application Programs
W Basic Weighing Function
3. 5. Minimum Load for Automatic Taring and Automatic Printing
3. 5. 1 * 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
Z Counting
3. 5. Minimum Load for Automatic Taring and Automatic Printing
Numeric menu as for Weighing
3. 6. Minimum Load for Initialization
3. 6. 1 * 1 digit
3. 6. 2 2 digits
3. 6. 3 5 digits
3. 6. 4 10 digits
3. 6. 5 20 digits
3. 6. 6 50 digits
3. 6. 7 100 digits
3. 6. 8 200 digits
3. 6. 9 500 digits
3. 6.10 1000 digits
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3. 9. Resolution for Calculation of Reference Value
3. 9. 1 * Display resolution
3. 9. 2 Display resolution + 1 decimal place
3. 9. 3 Display resolution + 2 decimal places
3. 9. 4 Internal resolution
3.11. Storage Parameter
3.11. 1 * At stability
3.11. 2 At increased stability
3.12. Reference Sample Updating
3.12. 1 Off
3.12. 3 * Automatic
3.13. Reference Weighing Instrument
3.13. 1 * No reference instrument selected
3.13. 2 WP1
3.13. 3 WP2
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
58
Configuration