Sartorius CIS1 User Manual

Example:
Combics 1 plus: Weighing with tare value entered using the numeric keypad; generate printout of results
e Switch on the Combics 1 plus
The automatic self-test runs. Once a readout is shown, Combics 1 plus is automatically
zeroed and ready to operate. With no load on the weighing instrument, you can zero the
instrument at any time by pressing (.
.25 Enter the tare weight in the current weight unit using the keypad
(in this example, 0.25 kg).
) Tare the weighing instrument
Place container with sample on the weighing instrument
Read the result
k Toggle the display from net to gross weight values. The display shows
the gross weight
(in this example, 0.250 kg for the container plus 2.000 kg for the sample)
14
Operating the Combics 1 plus

Sartorius CIS1 Specifications

General

Brand	Sartorius
Model	CIS1
Category	Monitor
Language	English