Example:
Combics 1 plus: Weighing with varying tare values; generate printout of results, delete tare values
e Switch on the Combics 1 plus
The automatic self-test runs. Once a readout is shown, the Combics is automatically
zeroed and ready to operate. With no load on the weighing instrument, you can zero the
instrument at any time by pressing (.
Place empty container on the weighing instrument
Tare the weighing instrument
)
Note: With the automatic tare function enabled, you do not need to press )
to tare the weighing instrument; the tare weight is stored automatically when you
place the container on the weighing instrument.
Wait until a zero value is displayed together with the NET symbol.
Place packaged sample in the container
.25 Enter the tare weight of the packaging in the current weight unit using the keypad
(in this example, 0.25 kg).
) Save the package weight. The package tare is added to the container tare.
Read off net weight
16
Operating the Combics 1 plus
To Next Page
Loading...