Basic Weighing Function
Features
– Taring the balance/scale
– Printing weights
Using Verified Balances/Scales as Legal
Measuring Instruments in the EU*:
The type-approval certificate for verifi-
cation applies only to non-automatic
weighing instruments. For automatic
operation with or without auxiliary
measuring devices, you must comply
with the regulations applicable to the
place of installation.
§ Before using the balance/scale as a legal
measuring instrument, calibrate and
adjust it at the place of use using the
built-in motorized calibration weight;
for details, see “Calibration/Adjustment”
in this chapter.
$ The temperature range (°C) indicated on
the verification label may not be
exceeded during operation.
Example:
BD ED 200
K +10°C to +30°C
* Including the Signatiories of
the Agreement on the Eruopean
Economic Area
Preparation
§ Switch on the balance/scale: Press e
§ Tare the balance/scale, if necessary:
Press w
$ If necessary, change the configuration
settings:
see the chapter entitled “Configuration”
$ If desired, load the factory settings:
see the chapter entitled “Configuration”
Additional Functions
$ Switching off the balance/scale:
Press e
13
To Next Page
Loading...
Need help?
General