Sartorius Factory Series Installation Instructions And Safety Information

2
with the following additional
functions:
– Second tare memory
– Identifiers
– Product data memory
– Optional storage of data
from Application 3
– Printouts
The following special performance
features make the IWA platforms ideal
as inspection, measurement and
testing equipment for use in quality
management systems:
– isoTEST calibration and
adjustment function
– ISO/GMP-compliant
documentation of results
– Password protection for parameter
settings
The FCT01-X terminal meets the
highest requirements on the accuracy
and reliability of weighing results
through the following features:
– Rugged, durable construction
– IP65-protected housing
– Allowable ambient operating
temperature: 0°C to +40°C
(+32°F to +104°F)
The FCT01-X gives you flexibility
through a choice of installation
options:
– Benchtop operation
– Floor-stand mounting
– Wall mounting
– Control box installation
All connecting cables are fitted with
cable glands or threaded round
connectors for network integration
(X-bus or Profibus).
Intended Use
The stainless steel version of the
FCT01-X from Sartorius is an
intrinsically safe display and control
terminal approved for use in Category
2 and 3 hazardous areas/locations
as defined in Directive 94/9/EU
(Zones 1 and 2 as defined in DIN
EN60079-14, VDE 0165 Part 1).
It is equipped with a built-in analog/
digital converter for connecting
standard, commercially available
strain-gauge load cells and analog
weighing platforms, such as the IWA,
IU and IF Series platforms from
Sartorius. When choosing load cells
for use with your FCT01-X terminal,
make sure you observe the limits listed
in the EC type-approval certificate for
the terminal (included in this manual).
It is particularly important to determine
the temperature class of resistors in
load cells. Furthermore, Item 5.4 of
the EN50020 standard must be
strictly observed.
The FCT01-X lets you work with up to
3 application programs
simultaneously. You can choose from
the following:
Application 1:
– Toggling between two weight units
– Counting
– Weighing in percent
– Animal weighing
– Calculation
– Recalculation
Application 2:
– Checkweighing
– Time-controlled functions
Application 3:
– Totalizing
– Formulation
– Statistics
English page 2
Deutsch Seite 15
Français page 24
Italiano página 33
Español pagina 42
Nederlands pagina 51
Português página 60
Svensk sida 69
Suomi sivu 78
Dansk side 87
Ελληνικ Σελδα 96

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English