Need help?Do you have a question about the Sartorius Cubis Series and is the answer not in the manual?
General| Display | Color touch screen |
|---|---|
| Readability | 0.01 mg to 1 g |
| Interfaces | USB, Ethernet, RS-232 |
| Calibration | Internal and external |
| Housing | Die-cast aluminum |
| Response Time | Varies by model |
| Pan Size | Varies by model |
| Operating Temperature | 10°C to 30°C |
| Compliance | GLP |
| Power Supply | 100 – 240 V, 50/60 Hz |
| Capacity | Varies by model (up to 64 kg) |
| Repeatability | Varies by model |
| Linearity | Varies by model |
Guidance on using the manual, understanding symbols, and essential safety warnings for clarity and safety.
Comprehensive safety warnings covering electrical, explosion, handling, installation, and operational hazards.
Instructions for unpacking, identifying components, assembling the balance, and initial installation.
Powering on, display navigation, language settings, user management, and interpreting messages.
Understanding balance purpose, components, moving, accessories, modifications, and specific features like below-cell weighing.
Configuring balance settings, leveling, calibration, data output, display, and power modes.
Managing memory, updating software, and configuring communication interfaces (USB, PS2, RS-232, Network, Bluetooth).
Overview of task management, creating new tasks, and configuring applications like Weighing.
Detailed steps for configuring and executing various tasks such as Mass Unit Conversion, Density Determination, Statistics, Calculation, Averaging, Formulation, etc.
Configuring printouts, data output formats, events, elements, and command structures.
Procedures for updating balance software and understanding/resolving error and status messages.
Guidelines for maintaining, cleaning, and ensuring the safe operation of the balance.
Instructions for shipping, disposal, and understanding conformity and type-approval declarations.
General and model-specific technical data, available accessories, and EC Type-Approval information.
Dimensional drawings and measurements for various balance models with different draft shield configurations.
Identification of labels, markings, and plates on balance components and modules.
To Next Page
