Need help?Do you have a question about the Sartorius Cubis MCA Series and is the answer not in the manual?
General| Model | MCA Series |
|---|---|
| Readability | 0.1 mg to 1 mg depending on model |
| Pan Size | 90 mm diameter |
| Calibration | Internal or external calibration |
| Display | Color touchscreen |
| Connectivity | RS232, USB, Ethernet |
| Compliance | GLP, GMP |
| Power Supply | 100 – 240 V, 50/60 Hz |
Specifies the correct usage and environmental conditions for the device.
Outlines the necessary qualifications for operating personnel.
Details safety precautions related to the device's electrical components.
Provides instructions on how to act in case of an emergency.
Identifies and describes all components of the weighing display.
Details user profiles, roles, and login procedures.
Guides users on how to navigate and interact with menus and displays.
Provides guidelines for choosing a suitable location for the device.
Provides steps for installing analytical or flat glass draft shields.
Details the procedure for installing a frame draft shield.
Provides instructions for connecting the device to the mains power.
Guides on adjusting default settings for optimal operation.
Details the process of setting a password for user profiles.
Guides on configuring the device for network printing.
Lists parameters for managing user profiles and access controls.
Lists parameters for date, time, display, ionizer, and device maintenance.
Explains the procedure for powering the device on and off.
Details how to log in and out of user profiles.
Guides on how to level the device using motorized feet.
Details the step-by-step process for performing a weighing.
Explains the concepts and necessity of calibration and adjustment.
Guides on using the internal isoCAL function for calibration.
Details the process for performing internal calibration and adjustment.
Explains how to save and mark values with IDs for printouts.
Provides instructions and precautions for cleaning the device.
Explains the process for updating the device's firmware.
Details how to update the QAPP Center software.
Lists common warning messages, their causes, and remedies.
Provides solutions for common operational problems and errors.
Details the electrical specifications of the device and AC adapter.
Lists detailed metrological specifications for various device models.
Lists the conditions that trigger the isoCAL function.
To Next Page