Sartorius Cubis MCA Series - Getting Started; Installing the AC Adapter

54 Operating Instructions Cubis
®
MCA
Getting Started
6 Getting Started
Procedure
t NOTICE Improper connection may damage the device! If the device
isconnected using electronic components, e.g. printer, PC: The device
must be disconnected from the power supply. Ensure that the device
isdisconnected from the power supply.
t Connect the device using electronic components (see electronic
components instructions).
6.1 Installing the AC Adapter
Procedure
t If this relates to a device without an electronics module: Plug the
DCsupply cable of the AC adapter into the device’s “power supply”
connection socket and tighten the threaded fitting.
t If this relates to a device with an electronics module: Plug the DC supply
cable of the AC adapter into the electronics module’s “power supply”
connection socket and tighten the threaded fitting.
t Connect the power supply cable to the AC adapter connection.