Sartorius Cubis MCA Series - Other Symbols; Target Groups

8 Operating Instructions Cubis
®
MCA
About these Instructions
1.2.2 Other Symbols
t
Required action: Describes actions which must be carried out.
y Result: Describes the result of the actions carried out.
[ ] Text inside brackets refers to control and display items.
[ ] Text inside brackets indicates status, warning, and error
messages.
Indicates information for legal metrology for conformity-
assessed (verified) devices. Conformity-assessed devices are
also referred to as “verified” in these instructions.
Figures on the Operating Display
The figures on the operating display of the device may deviate from those
inthese instructions.
1.3 Target Groups
These instructions are addressed to the following target groups. The target
groups must possess the specified knowledge.
Target
group
Knowledge and responsibilities
User The user is familiar with the operation of the device and
the associated work processes. They understand the
hazards which may arise when working with the device
and know how to prevent them.
They have been trained in the operation of the device.
The training is carried out by the operating engineer |
laboratory manager or the operator of the device.
Operator The operator of the device is responsible for compliance
with safety requirements and workplace safety
regulations.
The operator must ensure that all persons who work with
the device have access to the relevant information and are
trained in working with the device.