176 Cubis MSU User Manual
Accessories
Accessories
Verifiable data printer for connection to RS-232, 25-pin. Accessory interface YDP10-0CE
Verifiable data printer with Bluetooth® (only with YDO01MS-B or option IB) YDP10BT-0CE
Paper rolls for printer YDP10-0CE; 5 rolls 50 m each 6906937
Color ribbon for YDP10-0CE and YDP10BT-0CE 6906918
Additional display, LCD, text size 13 mm, backlit YRD03Z
RS232C connection cable to connect PC with 9-pin COM interface, length 1.5 m 7357314
Standard operating procedure (SOP) YSL07D
Infrared sensor for touchless function triggering (e.g., draft shield control) YHS01MS
Hand switch for printing, taring, or to use function keys, selection via menu, incl. T connector YHS02
Foot switch for printing, taring, or to use function keys, selection via menu, incl. T connector YFS01
Foot switch for the functions draft shield on/off (only in combination with DA and DI draft shield),
tare and print YPE01RC
Density determination kit for solids and liquids for weighing modules with a readability of < 1 mg YDK01MS
3-segment control display, red – green – red, for plus|minus measurements, incl. T connector YRD11Z
Barcode reader with connection cable, 120 mm reading range YBR03PS2
Pipette calibration kit for models with 0.01 mg and 0.1 mg readability; hardware and software on request
Software for pipette calibration on request
RS232C data interface, 25-pin for connection of Cubis accessories YDO01MS-R
Bluetooth® data interface for wireless connection of the YDP10BT data printer or PC YDO01MS-B
RS232C data interface, 9-pin including PS/2 for connecting a PC or keyboard YDO01MS-P
Antistatic weighing pan, diameter 130 mm, for weighing modules with a readability of 0.1 mg or 0.01 mg YWP01MS
Support arm for 10/100 mg precision weighing modules for raising the operating unit YDH01MS
Weighing table made from synthetic stone, with vibration dampening YWT03
Wall console YWT04
Weighing table made from wood with synthetic stone for precise, reliable measurements YWT09
Display and control unit with backlit LC display and tactile keys YAC01MSE
Display and control unit with backlit b/w graphic display and tactile navigation keys YAC01MSU
Display and control unit with color TFT graphic display and touch screen YAC01MSA
Display cable 3m, for separated setup of display and balance unit YCC01-MSD3
Connection cable 3m, for connecting the electronics module and weigh cell on models MSx225 on request
SartoCollect software for data communication between balance and PC YSC02
Sartorius OPC server for connecting all Sartorius Cubis balances
Requires 32-bit Microsoft Windows 2000 or XP with the current service packs.
(free download of a 30-day test version from the Sartorius website)
– Initial license 6289OPC
– Each additional license within an order 6289OPC-L
The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc.
The use of this brand name and trademark by Sartorius AG is under license.
Other brand names and trade names belong to their respective owners.
To Next Page
Loading...
Need help?
General
