Equipment Downtime
t Press the A key to switch the equipment to standby mode when it will not
be in use for a short period of time.
t For longer periods of time, the device should be disconnected from the power
supply.
Connecting Electronic Devices (Peripherals)
t Make absolutely sure that the device is unplugged from the power supply
before connecting/disconnecting any peripheral device (printer, scanner, PC) to
or from the data port.
3
A device connected to the power supply should never be opened.
Anti-theft Locking Device (Accessory)
t An optional anti-theft locking device can be installed to the back
of the balance.
Cubis MSU User Manual 19
Getting Started
To Next Page
Loading...
