Sartorius Cubis Series User Manual

System Settings (Menu)
38 Cubis MSU User Manual
Configure Timer Controlled Actions
You can program the following actions so that they run automatically at preset
times:
– Show message and execute command (see example below)
– Execute command
– Show message (e.g., a prompt as a reminder)
y The available actions are displayed. When you open this menu for the first time,
the list will be empty.
t Select Edit.
t To define a new timer-controlled action, select Create.
Later you can also modify, copy, or delete each action here.
Example: You want the “Internal calibration/adjustment” function to run each
morning at 7:00 a.m. In addition, you want a message to be displayed.
t Select the desired action (e.g., “Show message and execute command”).
t Select the command you want to be executed (e.g., “Internal calibra-
tion/adjustment”).

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model