System Settings (Menu)
Cubis MSU User Manual 39
t Enter the text you want to be displayed when the action is being performed
(e.g., “Timer-controlled adjustment”).
t Enter the time when the action should be performed for the first time.
t Define the time interval at which you want the action to be repeated (e.g., one
day for daily occurrence).
t To start the action at the preset time, select Enable action.
Here you can disable the programmed action at any time and re-enable it later with
a new starting time.
y An overview of all settings for the action is displayed.
t Check and correct all settings as required.
t Select Next.
t Enter a name and a description for the action.
t To save the action, select Save.
To Next Page
Loading...
