Sartorius Cubis Series User Manual

System Settings (Menu)
Cubis MSU User Manual 35
System Settings (Menu)
This menu contains all balance settings relevant to the device. Basic settings can
be made here that immediately affect the device. Changed settings do not affect
previously defined tasks and user profiles.
h
All system settings are applied to all user profiles.
h
As long as a task is active and/or a user has been selected, several basic settings
cannot be changed. In order to change all settings, “Weighing” has to be selected
in operating mode and no user profile may be selected.
Not all functions/settings can be selected on balances used as legal measuring
instruments.
t To open System Settings, select Menu when the balance is in operating
mode
.
y The list of available system settings is displayed.
t Use the cursor softkeys to select the menu item for the settings you would like
to edit.
System settings are divided into the following menus:
– Level the balance
– Calibration/adjustment data
– Configure timer controlled actions
– Device information
– Device parameters
– Import/export data
– Service
You have already learned how to use the menus. In the following, only configura-
tion options are described and explained.

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model