Sartorius Cubis Series User Manual

Mass Unit Conversion
Cubis MSU User Manual 65
Mass Unit Conversion
Purpose: The weight value can be displayed in up to a maximum of five different units
in succession (see table below). However, the desired weight units must be assigned
beforehand (1 through 5).
Combination options: Second tare (SQmin function, DKD measurement uncertainty)
Not all units can be selected on balances used for legal metrology.
The user can only switch between metric units (e.g., milligram, gram, kilogram).
This may also depend on the balance model.
Conversion Factors for Weight Units
Unit Factor Display
Gram 1.00000000000 g
Kilogram 0.00100000000 kg
Carat 5.00000000000 ct
Pound 0.00220462260 lb
Ounce 0.03527396200 oz
Troy ounce 0,03215074700 ozt
Hong Kong tael 0.02671725000 tlh
Singapore tael 0.02645544638 tls
Taiwan tael 0.02666666000 tlt
Grain 15.43235835000 GN
Pennyweight 0.64301493100 dwt
Milligram 1000.00000000000 mg
Parts per pound 1.12876677120 /lb
Chinese tael 0.02645547175 tlc
Momme 0.26670000000 mom
Carat 5.00000000000 K
Tola 0.08573333810 tol
Baht 0.06578947437 bat
Mesghal 0.21700000000 MS
Ton 0.00000100000 t
Pound: ounce 0.03527396200 lb:oz
Newton 0.00980665000 N
Microgram 1000000.00000000000 μg

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model