Sartorius Cubis Series User Manual

Error and Status Messages
150 Cubis MSU User Manual
Error and Status Messages
Error messages appear directly in the respective active application, usually with
descriptive text on how to correct it. Warning and reminder functions are displayed
with a fixed 3-level action hierarchy:
Status Display (Tab):
The available status displays and their meanings are described in the “Display”
section.
Warning Text with a Repeated Reminder
Error Text with Mandatory Prompt for Troubleshooting
You cannot proceed until you have eliminated the error.
Ineffective Key Commands or Entries
If you press a key that has no function or is not allowed, this error is indicated
as follows:
– A double beep indicates that the key has no function assigned to it.
– An error message indicates invalid input.
– An error code or error message indicates incorrect operation.
Error messages are shown on the display for two seconds or must be acknowledged
by pressing a key. The error text provides direct suggestions on how to proceed.
If the error cannot be resolved by following the suggestions, please contact
Sartorius customer service.

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model