34
Product Order No.
In-use dust cover
– Only over operating elements for models
GD…, AZ214, AZ124, AZ64, TE214S, TE124S, TE64, TE…-DS 6960TE01
– for models with a rectangular weighing pan 6960TE03
– for models with a round weighing pan 6960TE02
Attaching the in-use dust cover to models with a glass draft shield:
– Remove adhesive strip from balance/scale housing
– Place dust cover on balance/scale
– Stick adhesive strip on dust cover
Weighing bowls/scoops/gem trays
– 300 ml, weight 86 g, stainless steel 6407
– 1000 ml, weight 240 g, stainless steel 641211
– 300 ml, weight 22 g, aluminum 69641304
– 110 ml, 90 mm d, aluminum 69GP0003
– 270 ml, weight 62 g, 137 mm d, stainless steel YWP03G
– 62 mm d, stainless steel 6910848
– 85 ml, 70 mm d, aluminum YWP06G
– 180 ml, 90 mm d, aluminum YWP05G
– 174 mm d, stainless steel YWP04G
Calibration weights
– for AZ3102, TE 3102S (2000 g; E2) YCW6228-00
– for AZ313, AZ214, TE313S, TE214S (200 g, E2) YCW5228-00
– for AZ124, TE124S (100 g, E2) YCW5128-00
– for AZ64, TE64 (50 g, E2) YCW4528-00
– for GD103 (20 g, F1) YCW4238-00
– for GD252 (50 g, F1) YCW4538-00
– for AZ153, GD603, TE153S (100 g, F1) YCW5138-00
– for AZ1502, TE1502S, GE1302, GE4101,
– for GE2102 (2000 g, F1) YCW6238-00
TE4101, (1 kg, F1) YCW6138-00
– for AZ612, GE812, GE612, GE811, TE601 (500 g, F2) YCW5548-00
– for GE412, TE412 (200 g, F2) YCW5248-00
– for AZ212, GE212, TE212 (100 g, F2) YCW5148-00
– for AZ4101, TE4100 (2000 g, F2) YCW6248-00
– for AZ2101, GE2101, TE2101 (1 kg, F2) YCW6148-00
– for AZ6101, GE7101, TE6101, TE12000, TE6100 (5 kg, F2) YCW6548-00
or alternative (5 kg; ± 0.25 mg) YSS653-00
To Next Page
Loading...