77
Step Key (or instruction) Display/Output
11. Save initial weight value
Ini.wt soft key
Remove the filled container
12. Measure the 2nd tare weight Place 2nd empty container
on balance/scale
13. Save tare value
Tare soft key
Remove the empty container
14. Measure the initial weight Fill the second container
(in this case: 22.43 g) Place filled container
on balance/scale
15. Save initial weight value Ini.wt soft key
Remove the filled container
16. Measure the third tare weight Place 3rd empty container
on balance/scale
17. Save tare value
Tare soft key
Remove the empty container
18. Measure the initial weight Fill the container
(in this case: 25.79 g) Place filled container
on balance/scale
19. Save initial weight value
Ini.wt soft key
Remove the filled container
20. Treat the sample
21. Go to backweighing function
OBackw soft key
To Next Page
Loading...