Need help?Do you have a question about the Sartorius LA Reference Series and is the answer not in the manual?
General| Model | LA Reference Series |
|---|---|
| Readability | 0.1 mg |
| Linearity | ±0.2 mg |
| Display | LCD, backlit |
| Power Supply | 50/60 Hz |
| Calibration | Internal calibration options |
| Interface | RS232 |
| Operating Humidity | 15% to 80% (non-condensing) |
Compensate for unevenness and achieve horizontal positioning for consistent reproducibility.
Choose from 5 languages for the information display.
Procedure for entering the current date and time according to local clock.
Choose from 5 languages for the information display.
Step-by-step guide to setting the language to "U.S. Mode" via menu options.
Set parameters for serial interface port and external switch function.
Configure display contrast, background, backlighting, and digit size.
Assign functions to keys, manage CF function, and block key functions.
Overview of basic settings for Application 1, including weight units and display accuracy.
Determine the number of pieces of approximately equal weight.
Obtain weight readouts in percent proportional to a reference weight.
Determine weights of unstable samples or under unstable ambient conditions.
Recalculation function for weight values.
The basic weighing function is always accessible and can be used alone or in combination with an application program.
A port for a below-balance weighing hanger is located on the bottom of the balance.
Lists the functions assigned to soft keys like Cal, isoCAL, S ID.
Enter a password to block access to the operating menu and functions.
Enter your own personal password (20 characters max.).
Set date and time stamp for ISO/GLP/GMP printouts.
Set parameters for serial interface port and external switch function.
Assign different functions to keys for input and application deletion.
Configure acoustic signal and power-on mode.
Connect peripheral devices of MP8 generation via interface emulation.
Perform external calibration with factory-defined weight and automatic adjustment.
Configure balance for automatic or manual adjustment after calibration.
Specify the calibration weight for external calibration/adjustment.
Balance automatically calibrates and adjusts based on temperature or time intervals.
Enter up to three times of day for automatic calibration/adjustment.
Information on disabling automatic adjustment for specific balance types.
Lists functions for Start, Weigh, and other application-specific keys.
Note on using application programs on verified balances for legal metrology.
Configure the balance to start the last active application automatically.
Switch display between two weight units by pressing a soft key.
Select the primary unit of weight from a list.
Select the secondary unit of weight from a list.
Lists soft key functions like nRef, wRef, Count, Weigh, Start.
Update average piece weight during counting if AWP update is manual or automatic.
Lists soft key functions like pRef, Wxx%, Perc, Restart, Weigh, Start.
Formulas used for calculations in weighing in percent.
Lists soft key functions for New, Manual start, mDef, Mul, xNet, xRes.
Options to print results automatically after averaging.
Lists soft key functions for equation input, operators, and calculation.
Define the number of decimal places for the calculated result.
Lists soft key assignments for Wa, Wfl, Wr, Start, Param, Densit, Weigh, Vol.
Formulas used for density calculation via Buoyancy, Displacement, and Pycnometer methods.
Choose from four sequences for measuring tare, initial, and backweights.
Lists soft key functions for Create lot, Select lot, Save initial weight, etc.
Enter numbers to change lot/sample or access display pages.
Lists soft key functions like Param, Show, LLHH, Diff, Net.
Diagrams showing control line responses based on weighing results.
Lists soft key functions like Stop, Quit, Interv, Set.
Configure printout settings to exclude time from net value prints.
Lists soft key functions like M+, M-, MR, nDef, Nom.
Details on how transaction or component counters are printed.
Lists soft key functions like M+, M-, MR, nDef, Nom.
Information on what is included in the formulation report printout.
Lists soft key functions like M+, M-, MR, nDef.
Lists soft key functions PT1/T1 for storing tare values.
Shows the printout format for data stored in the 2nd tare memory.
Note on entering and printing tare values in legal metrology.
Lists soft key functions ID and Delete.
Lists soft key functions ProDat, Delete, Load, Change, Store, Yes, No, New.
Display the required minimum sample quantity based on quality assurance requirements.
Display and print DKD uncertainty of measurement values.
Information displayed on the balance, application, and sample weighed.
Displays balance capacity, minimum capacity, verification interval, and readability.
Shows busy symbol, plus/minus sign, or zero symbol.
Symbols for Applications 1, 2, 3, print job, and ISO/GLP.
Contains explanatory text about the application or error codes.
Texts indicating function assigned to each key and parameter settings.
Configure an extra line for identification of weighed or calculated values.
Generate a printout of initialization values before measured results.
Print parameters related to weighing conditions for ISO/GLP compliance.
Automatic printout of animal weights or weights plus calculated averages.
Information on regular servicing by Sartorius technician for extended service life.
Note that repair work must be performed by trained service technicians.
Instructions for cleaning the balance, including stainless steel surfaces.
Illustrates and labels components of the LA310S and similar balance models.
Provides general specifications for AC power, frequency, temperature, and power consumption.
Details specifications like readability, capacity, and repeatability for specific models.
Provides general specifications for AC power, frequency, temperature, and power consumption.
Details specifications like accuracy class, scale interval, and capacity for specific models.
Explains the C mark and Sartorius' compliance with EC directives and standards.
Details EMC requirements and references to EN 61326-1.
Lists applicable European standards like EN 60950 and EN 61010.
Regulates the determination of mass in legal metrology.
To Next Page
