140
Order No.
Data printer, suitable for use in legal metrology; YDP03-0CE
with date, time, statistics and transaction
counter functions
Paper rolls, for YDP03-0CE; 5 units, each with 50 m 6906937
Ink ribbon cartridge, for YDP03-0CE 6906918
External rechargeable battery pack,
with battery level indicator YRB06Z
SartoConnect
data transfer software; with RS-232C standard cable;
for direct input
of weighing data into an application
program (e.g., such as Excel)
with RS-232 C connecting cable, length 1 m YSC01L
with RS-232 C connecting cable, length 5 m YSC01L5
with RS-232 C connecting cable, length 15 m YSC01L15
Foot switch, for activating the print, tare or F key; YFS01
function can be selected by menu code;
incl. T-connector
Hand switch, for activating the print, tare or F key; YHS02
function can be selected by menu code;
incl. T-connector
T-connector YTC01
for connecting two peripheral devices to the balance
Balance table YWT01
for precise, reliable weighing operations
Cast stone table, with damping device YWT03
Remote display
LCD; height of digits: 13 mm; reflective YRD02Z
Density determination kit
for all 0.1 mg models YDK01
for all 1 mg/10 mg models YDK01LP
Draft shield chamber with sliding doors YDS01LP
for 1-mg LA models
In-use dust cover
– for models with a round weighing pan Available
on request
– for models with a rectangular weighing pan Available
(weighing capacity ≤ 12.1kg) on request
3-segment checkweighing display YRD11Z
red/green/red, for over/under checkweighing
(light/heavy); incl. T-connector
Carrying case, for all models, up to 12.1 kg YDB01LP
Weighing bowls/pans/trays:
Made of chrome-nickel steel; without pouring spout;
for all models with a weighing capacity >400 g;
– 1,000 ml capacity 641211
– 500 ml capacity 641212
Accessories (Options)
Order No.
Weighing scoop
Made of chrome-nickel steel,
90 mm + 32 mm + 8 mm 641214
Ionizing blower 220 V YIB01-0DR
for electrostatically charged samples 110 V YIB01-0UR
Stat Pen, unit to neutralize static electricity
on samples (100V to 230V, 50/60Hz) YSTP01
Cable for connecting the weighing
cell to a separate display and control unit
(length: 2.70 m)
– for balances with a weighing capacity ≤ 64 kg YCC01-19M3
Flow Rate Controller YFC02Z-V2
for pumps and feed units
with analog or pulse interfaces
Support arm, for raised display configuration
– for balances with a weighing capacity ≤ 12 kg YDH01LP
– for balances with a weighing capacity ≥ 16 kg YDH02LP
Bar code scanner
(YCC01-0024M01 required) YBR02FC
Cable for connecting the bar code scanner YCC01-0024M01
Standard Operating Procedure (SOP) YSL01E
RS-232C interface cable 7357312
for connecting the balance to a PC
with a 25-pin COM port; length approx. 1.5 m
RS-232C interface cable 7357314
for connecting the balance to a PC
with a 9-pin COM port; length approx. 1.5 m
RS-232 USB interface cable YCC01-USBM2
AC adapter ING-2
with IP65 protection rating
for 230 V 69 71899
for 120 V 69 71500
Antistatic pan YWP01LA
for models with a readability of 0.1 mg
Hook for below-balance weighing 69EA0040
for models LA34001S, LA16001S, LA34001P,
LA34000
Calibration weights Information
for all LA balances; extensive assortment; on request
available with certification
To Next Page
Loading...
Need help?
General
