49
Application Programs
Soft Key Functions
Start Start application program
Weigh. Toggle to basic weighing
functions
Using Verified Balances as Legal
Measuring Instruments in the EU*:
All application programs can be selected
on balances verified for use in legal
metrology.
Calculated values can be indicated as
follows:
– Percent = %
– Piece counting (Counting) = pcs
– Computed value = o,G
Auto-Start Application When the
Power Goes On
In the Setup menu, you can select
whether the last application active
before you turn off the power starts
automatically when the power is turned
on again (Setup: Application para-
meters: Auto-start app. when power
goes on: On)
Toggle between Two Weight
Units
()
Purpose
With this application program you can
switch the display of a weight value
back and forth between two weight
units by pressing a soft key.
You can use the “Toggle between Two
Weight Units” application in combination
with a program chosen from Application
2 (checkweighing, time-controlled
functions) and one from Application 3
(totalizing, formulation, statistics) as
well as with the extra functions.
Available Features
– Toggling the displayed weight
– Setting the display accuracy
– Other features as for the basic weighing
function
Factory Settings
Weight unit 1:
Grams /g
Display accuracy 1: All digits
Weight unit 2: Grams /g
Display accuracy 2: All digits
* including the Signatories of the Agree-
ment on the European Economic Area
Preparation
Balances used as legal measuring instruments: grams and kilograms are the only weight
units available
Standard balances: The following weight units are available in both ranges:
Display/ Line for
Unit Conversion factor Printout metrological data
Grams 1.00000000000 g g
Kilograms 0.00100000000 kg kg
Carats 5.00000000000 ct ct
Pounds 0.00220462260 lb lb
Ounces 0.03527396200 oz oz
Troy ounces 0.03215074700 ozt ozt
Hong Kong taels 0.02671725000 tlh tlh
Singapore taels 0.02645544638 tls tls
Taiwanese taels 0.02666666000 tlt tlt
Grains 15.43235835000 GN GN
Pennyweights 0.64301493100 dwt dwt
Milligrams 1000.00000000000 mg mg
Parts per pound 1.12876677120 /lb lb
Chinese taels 0.02645547175 tlc tlc
Mommes 0.26670000000 mom M
Austrian carats 5.00000000000 K K
Tola 0.08573333810 tol tol
Baht 0.06578947437 bat bat
Mesghal 0.21700000000 MS MS
G Turn on the balance: Press e
G Select the Toggle Weight Units application in the Setup menu: press o
G Select
Application parameters: press the q soft key 2 +,
then the
O soft key once
G
Application 1 (basic settings): press the O soft key
G Select
Toggle wt. units: (repeatedly) press the Q or q soft key
G Confirm
Toggle wt. units: press the O soft key
Toggle wt. units Weight unit 1 see above
Display accuracy 1 ο All digits
Reduced by 1 digit for weight change
Reduced by 1 digit *
Weight unit 2 see above
Display accuracy 2 ο All digits
Reduced by 1 digit for weight change
Reduced by 1 digit *
ο = factory setting
* = not for verified balances used as legal measuring instruments
see also “Application Parameters (Overview)” in the chapter entitled “Configuration”
G Save settings and exit the Setup menu: press the
oo soft key
To Next Page
Loading...
Need help?
General
