Sartorius LA Reference Series User Manual

Purpose
This menu item enables you to have
information displayed about the specific
balance (“device”), as well as “FlexPrint”
information.
Displaying Device Information
§ Select the Setup menu:
press the o key
> “SETUP” is displayed:
§ Select “Info”:
Repeatedly press the q soft key, then
press the O soft key
> Device information is displayed:
§ Print device information:
Press the r key
SETUP INFO
Version no.: 01-35-18
Bal. ver. no.: 00-20-12
Model: LA5200P
Serial no.: 70906913
oo
> Printout (Example)
--------------------
23.02.2000 13:02
Model LA5200P
Ser. no. 91205355
Vers. no. 01-35-18
(Version of the operating program)
ID BECKER123
(User-ID)
--------------------
SETUP
INFO
DEVICE
--------------------
Version-no.:
01-35-18
(Version of the operating program)
Wgh. sys. vers:
00-20-12
(Version no. of the weighing cell)
Model:
LA5200P
Serial no.:
91205355
Next mainten.:
01.01.2004
Service phone:
00495513080
SQmin:
100.00 g
--------------------
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> Original settings are restored
Factory Settings
Each parameter category has a factory
setting. In the Setup menu, you can
restore all factory settings by confirm-
ing the selection
YES.
The following settings are not restored:
– Language
– Password
– Display contrast
– Time (clock)
Display Flexprint Information
§ Select the Setup menu:
press the o key
> “SETUP” is displayed:
§ Select “Info”:
press the q soft key repeatedly and
then the O soft key
§ Select “FlexInfo”:
press the q soft key and then
the O soft key
>
The FlexPrint information is displayed,
with print instruction file name,
software ID and version number:
$ To select a particular print file name
with software ID (for example, ID403),
if desired:
press key q or Q as required
> If the display shows ID--- :
The weight block for legal metrology is
not printed by this print file.
> Display of version number:
V.xx.xx.xx
Created by Sartorius:
V.S.xx.xx.xx
§ Return to SETUP overview:
press the o soft key
§ Exit Setup menu:
press the oo soft key
> The device returns to the previous mode
34
Device Information

Sartorius LA Reference Series Specifications

General

Brand	Sartorius
Model	LA Reference Series
Category	Scales
Language	English