Example:
Configure an Individual Printout for Counting Application to Include Dotted Line, Date/Time, Piece Count and Net Weight
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Counting
Exit the Setup menu: press the
oo soft key
Then call Setup again: Printout: Application-defined output: Configured printout
Step Press key(s) (or follow instructions) Display/Output
1. Select Setup menu, o, then
then “Printout”
q repeatedly and
O soft key
2. Confirm “Application-defined
O soft key
output”
3. Select and confirm
q soft key 3x and
“Configured printout”
O soft key
4. Confirm “Indiv. printout”
O soft key
5. Select “Blank line”
O, q, l soft keys
6. Select “Date/time”
q soft key twice, then
l soft key
7. Select “Piece count”
q soft key repeatedly,
then
l soft key
8. Select “Net (N)”
Q soft key repeatedly,
then
l soft key
9. Exit “Printout” configuration
oo soft key
10. Perform weighing operations, r
then print
33
--------------------
14.01.2000 09:19
Qnt + 598 pcs
N + 2003.13 g
To Next Page
Loading...
