109
Example
Perform a weighing procedure with the “DKD uncertainty of measurement” application
Settings:
Setup: Application parameters: Extra function (F4): DKD uncertainty of measurement: Display: PA (process accuracy)
Setup: Application parameters: Extra function (F4): DKD uncertainty of measurement: Print: PA (process accuracy)
Setup: Application parameters: Extra function (F4): DKD uncertainty of measurement: Display: Input: 3.00000 (factory setting)
Step Press key(s) (or follow instructions) Display/Output
1. Turn on the balance, if not on, and e
configure the settings as indicated above
2. Place a container for a sample on the w
balance and tare
3. Measure weight of sample Add sample to container
4. Print weight r U 0.08 g
PA 0.024 %
N +2000.2 g
5. Weigh next sample (if any)
To Next Page
Loading...
Need help?
General
