98
Practical Example
Determine the Contents of Bottles: Bottle weight = 400 g.
Settings (changes in the factory settings required for this example):
Setup: App: Extra function(F4): 2nd tare memory: Automatic printout: Tare/preset tare
Step Key (or instruction) Display/Output
1. If necessary: turn on the balance e
and enter the settings given above
2. Enter bottle weight 4 0 0
(here: 400 g)
3. Store tare value
PT1 soft key
4. Determine content weight of bottles Place filled bottles on the balance
(here: contents = 650 g)
To Next Page
Loading...
