39
Keys
You can assign different functions to
the ckey for deleting input and
applications.
When you delete applications, you can
delete either the data stored for all
applications or just selected data.
CF function
in application
When you delete input, you can
either delete all the data input in a field,
or only the last character entered.
CF function for inputs
You can block key functions; you can
choose whether to block all keys (except
e and o, or just the alphanu-
meric keys.
Block key functions
Extra Functions
Acoustic Signal
An acoustic signal is emitted when you
press a key. When the key pressed is
allowed, the signal is a single beep-tone;
when it is not allowed, this is signaled
by a double-beep (key does not initiate
a function). In the Setup menu, you can
configure whether
– the acoustic signal should sound (
On)
– the acoustic signal should not sound
(
Off)
Power-On Mode
You can configure the balance so that
when a power supply is connected,
– the scale is off
(
Off/on/standby or
– the scale switches on automatically
(
Auto on)
You can also configure the scale to go
into the standby mode
(
Off/on/standby) when it is
turned off.
After you turn on the scale, a self-test
of the functions is run (
TEST is
displayed in the text line and the bar
graph is shown)
MP8 Interface Emulation
Purpose
With the MP8 interface emulation
function, you can connect peripheral
devices of the MP8 generation that
have separate AC power supplies (such
as the 73822... Data Control terminal,
a YFC..., or a YDI 50 Z Data Input dedi-
cated keyboard, for example) to your LA
balance.
Features
– The balance can be used only to
determine weights.
– The interface communicates exclusively
in the MP8 binary protocol.
– Select the application program and the
program index for MP8, as well as indi-
vidual application parameters, in the
Setup menu.
Preparation
– Activate the MP8 emulation mode*:
§ Press o
§
Select the factory settings
and confirm: press the q soft key
repeatedly and then the O soft key
§ Select
Reset to MP8:
press q soft key and O soft key
§ Select
Yes and press l to confirm
> The balance is restarted
* follow the same procedure to return
from MP8 emulation back to factory
setting
Factory Settings
Each parameter category has a factory
setting. To restore the factory settings,
select this item in the Setup menu and
select
YES to confirm.
The following parameters are not
restored to factory settings when you
activate this function:
– Language
– Password
– Display contrast
– Time (clock)
To Next Page
Loading...
Need help?
General
