Sartorius MA50-H - Device Parameters (Overview)

Device Parameters (Overview)
ο factory setting
√ user-defined setting
Setup – Password empty Enter 8
Device characters max.
parameters User ID empty Enter 20
characters max.
Weighing Adapt filter ο Normal vibration
parameters Strong vibration
Calibration/ Weight set number None Enter 14
adjustment (weight ID) characters max.
Calibration/adjustment 50.000g Enter exact
weight value weight value
Interface SBI Baud rate 150 baud
300 baud
ο 1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
Number of data bits ο 7 bit
1
)
8 bit
Parity None
2
)
ο Odd
Even
Number of stop bits ο 1 stop bit
2 stop bits
Handshake Software handshake
mode ο Hardware handshake
1 character after CTS
xBPI Network address 0 Enter any number
from 0 through 31
YDP01IS
YDP01IS label
(Label printout)
Sartonet Network address 1 Enter any number
from 1 through 31
YDP02IS
For keys, display and clock see next page
1
) not if “None” parity is selected
2
) only if 8 data bits selected
18
Factory setting
Factory setting
Factory setting