23
Example:
Adding the Item “Phase Results” to Configure the Printout Footer
Step Key (or Instruction) Display/Printout
1. Select Setup menu; s, then
Select “Printout q soft key twice,
configuration” then O soft key
2. Select printout footer q soft key twice,
then O soft key
3. Use the select bar to define q soft key repeatedly
the position for printout items
“Phase results” on the LIST
4. Change to Select O soft key
5. Select “Phase results” q soft key repeatedly
6. Include phase results l soft key
in the list
7. Select or delete other q Q l soft key
printout items, if desired or
oq Q Delete soft key(s)
8. Configure other analysis o q Q O soft key(s)
printouts, if desired
9. Exit Setup menu oo soft key
10. Perform moisture analysis p
and press --------------------
Time 15.0 min
FinWt + 9.5819 g
Res1 + 12.05 %L
Res2 + 7.12 %L
Res3 + 4.96 %L
C-Res + 24.13 %L
--------------------
To Next Page
Loading...
