SARTORIUS Master
pro
17
Operating the Balance
Key Functions
e On/off. Turns the display on/off. The balance remains in the
standby mode.
c Clear function. Used to interrupt/cancel functions; e.g., delete
data from memory, cancel calibration/adjustment functions, etc.
t Tare. Zeros the display.
p Print. The displayed data is output to the printer.
w Toggle. Toggles the readout between weight and calculated
value when using the counting, weighing in percent or calculation
programs; otherwise, toggles between two weight units.
N 6 function keys that are defined individually depending on the
program setting
ö SETUP. For accessing the SETUP program menu, storing menu
codes, exiting the menu.
-../ Numeric input (e.g., ID number).
} Decimal point for numeric input.
a Toggle to alphabetic input.
SETUP Program
– Press ] to turn on the balance.
– Wait until the power-up routine is completed (delayed power-on, display
segment test, function test).
– If the symbol to the left is displayed, press ö.
– The symbol to the left appears.
– The 6 function keys are automatically programmed with different functions.
The function keys are numbered from right to left from 1 to 6, i.e. function
key 1 is the key next to the D key.
– Press F1 to access the “input” mode.
– Press F2 to access the “menu.”
– Press F3 to access the “info” mode.
-– Press F4 to access the “Applic(ation)” menu
– Press F5 to access the “Config(uration)” menu
– Press F6 to return to the “Weighing” mode
(the ö key has the same function).
– If the symbol to the left is display after pressing a function key, a user pass-
word has been stored.
– This can be avoided by inputting a service password.
– In this case, input » 202122 « and press F1 to confirm.
Note: Except for the INFO mode, all other menus are stored by means of the user
password.
Note: The input options available in the MENU and in the INPUT mode are
expanded when the balance is switched to the service mode (see “Overview
of the User/Service SETUP Program,” page 9).
La-003e.BMP
La-001e.BMP
F6 F5 F4 F3 F2 F1
La-002e.BMP
TARE TARE
ABC1234567890
SETUP CF
D
La_bedie.EPS
To Next Page
Loading...