159
Accessories (Options)
Product Order No.
Glass plate support for conditioning samples inside the weighing chamber, YGS01ME
for ME models (0.01 mg and 0.1 mg readability)
Data printer verified for use in legal metrology; YDP03-0CE
with date, time, statistics and transaction counter functions
Paper rolls for YDP03-0CE; 5 units, each with 50 m 6906937
Ink ribbon cassette for YDP03-0CE 6906918
External rechargeable battery pack with battery level indicator
• for SE2 and all ME models YRB05Z
• for LA models YRB06Z
SartoConnect data transfer software; with RS-232 standard cable (1.5 m); YSC01L
for direct input of weighing data into an application program
(e.g., such as Excel)
Weight set for determination of the air density
• for ME5 YSS35-00
• for ME235S, ME235P, ME414S, ME254S and ME614S YSS45-00
Density determination kit
for all ME models (0.01 mg and 0.1 mg readability)
YDK01
Pipette calibration set
for all ME models (0.01 mg and 0.1 mg readability);
YCP03-1
hardware and software
Pipette calibration software YCP03-2
Foot switch 3 functions for all ME models and SE2 YPE01RC
Hand switch incl. T-connector YHS02
T-connector for connecting two peripheral devices to the balance YTC01
Balance table for precise, reliable weighing operations YWT01
Stone table with damping device YWT03
Wall console YWT04
Remote display LCD; height of digits: 13 mm; reflective YRD02Z
Carrying case for all ME models (0.01 mg and 0.1 mg readability) YDB01ME
Antistatic weighing pan • for ME5 YWP01MC
• for all ME models (0.01 mg and 0.1 mg readability)
YWP01ME
Ionizing blower, 220 V YIB01-0DR
for electrostatically charged samples 110 V YIB01-0UR
Stat pen unit to neutralize static electricity on samples YSTP01
(100V to 230V, 50/60Hz)
Cable for connecting the weighing cell to a separate display YCC01-19M3
and control unit (length, 2.70 m), for all LA models
Bar code scanner for SE2 and ME models (YCC01-0024M01 required) YBR02FC
Cable for connecting the LA balance to the bar code scanner YCC01-0024M01
Standard Operating Procedure YSL01E
Cable for connecting the weighing cell to a separate display and control unit YCC01-MED27
(length 2.70 m), for all ME models (0.01 mg and 0.1 mg readability)
Data interface
• PC-compatible (9-pin com port) incl. 5-pin connector for bar code scanner YDO01ME
• RS485 (12-pin com port, round) incl. 5-pin connector for bar code scanner YDO02ME
RS-232 Interface cable for connecting the balance to a PC with a 7357312
25-pin com port; length approx. 1.5 m
RS-232 Interface cable for connecting the balance to a PC with a 7357314
9-pin com port; length approx. 1.5 m
Weighing bowls and trays • Stainless steel, 20 g 6003
• Glass, 20 g 6015
• Stainless steel, 300 ml, with pouring spout 6407
Weighing scoops (pure aluminum)
• 2.7 x 4 x 12 mm, approx. 4.5 mg (250 per box) 6565
• 6.5 x 7 x 25 mm, approx. 52 mg (200 per box) 6566
To Next Page
Loading...
