14
Important Menu Settings
§ Hold down the L key [ENTER] for approx. 2 sec. “SETUP” will appear on the display (Level 1).
Level 1
SETUP
Language Settings
Level 1 Level 2
LANGUAGE § Press the R key to select “LANGUAGE”
§ Press the L key press [ENTER]
o GERMAN § Press the RS keys to select a language
ENGLISH § Press the L key [ENTER]: “o” appears;
FRENCH the desired setting is defined.
ITALIAN § Press the c key (Clear) several times to
etc. exit the menu.
Default Setting: Standard (0.1) or PolyRange (0.05 g/0.1 g); Grams, PT or LB.
Default for these parameters are defined under “SETUP-SCALE-UNIT” and
“SETUP-SCALE-DECIMALS”:
Level 1 Level 2 Level 3 Level 4
SETUP § Press the L key: [ENTER]
SCALE § Press the L key: [ENTER]
UNIT § RS keys: select “DECIMALS”
§ Press the L key: [ENTER]
GRAMS § RS keys: select “STANDARD”
o PT./LB. § Press the L key [ENTER]; “o” appears:
DECIMALS the new code has been set.
o STANDARD § Press the c key (Clear), several times
POLYRANGE to exit the menu.
I – Activating the Toggle Key
After the toggle key I (6), has been activated, you can individually configure it with either 1 or 2
decimal places, as well as with grams or PT./LB. (see below). Once activated, pressing the toggle key
toggles the display between units and decimal places.
Level 1 Level 2 Level 3 Level 4
SETUP § Press the L key [ENTER]
APPLICATION § RS keys: select “APPLICATION”
§ L key: press [ENTER]
TOGGLE § RS keys: select “TOGGLE”
OFF § L key: [ENTER],
o ON RS keys: select “ON”.
§ Press the L key [ENTER]; “o” appears;
the desired setting is defined.
§ Press the c key (Clear) several times to
exit the menu.
To Next Page
Loading...
Need help?
General