22
Accessories
Order no.:
In-use dust cover YDC01PMA
RS-232 data cable (SBI) (2 m) YCC01-0027M2
RS-232 data cable (BPI) (2 m) YCC01-0028M2
RS-232 data cable (BPI) (20 m) YCC01-0028M20
USB/RS-232 data cable (SBI) (1.80 m) YCO12
USB/RS-232 data cable (BPI) (1.80 m) YCO13
AC adapter, plug-mounted model STNG 6
– EC 230 V, 50-60 Hz 6971412
– USA/CDN 120 V, 50-60 Hz 6971413
AC adapter, benchtop model TNG 6 with cables
– Universal 115–230 V, 50-60 Hz 6971966
+ country-specific cable
C Marking
The C marking affixed to the scale indi-
cates its compliance with the following
Directives:
Council Directive 89/336/EEC
“Electromagnetic compatibility (EMC)”
Applicable European Standards:
Limitation of emissions acc. to product
standard EN 61326-1 Class B (residential
areas)
Defined immunity acc. to product
standard EN 61326-1 (minimum require-
ments, unmonitored operations)
Note:
The operator shall be responsible for any
modifications to Sartorius equipment and
for any connections of cables or equip-
ment not supplied by Sartorius and must
check and, if necessary, correct these
modifications and cable connections.
On request, Sartorius will provide
information on the minimum operating
specifications (in accordance with the
Standards listed above).
Council Directive 73/23/EEC “Electrical
equipment designed for use within
certain voltage limits”
Applicable European Standards:
EN 61010-1
Safety requirements for electrical equip-
ment for measurement, control and
laboratory use
If you use electrical equipment in instal-
lations and under ambient conditions
requiring higher safety standards, you
must comply with the provisions as
specified in the applicable regulations for
installation in your country.
To Next Page
Loading...
