4
Intended Use
The PMA7500.. or PMA 35.... Series
EX-approved scales from Sartorius meet
all requirements for fast and reliable
paint mixing. The scale housing
is solvent-resistant.
The weighing capacity of the single-range
scales, models PMA7500-X and
PMA7500-X.., is 7,500 g.
The capacity of the dual-range scales,
models PMA7500D-X and
PMA7500D-X.., is 7,500 g and
1,000 g, respectively. Models 35D-X
and 35 D-X000C have a 35-kg
weighing capactiy.
The built-in formulation program lets
you calculate different batch sizes and
measure out any amount as you would
a standard batch. The models that
are equipped with the recalculation
program can quickly recalculate batch
amounts to correct the filling procedure
if a component is overpoured or
underpoured; this saves you having
to make time-consuming calculations.
All models come with a program for
mass unit conversion (toggling between
weight units), as well as a serial data
interface and overload protection.
The PMA scales are ideal for
use as inspection, measuring and test
equipment in quality management
systems.
Built-in application programs
can be used for:
– Measuring in two weight units
– Recalculation
– Calculation
– Initializing the scale automatically
PMA scales meet the highest
requirements on the accuracy and
reliability of weighing results through
the following features:
– Efficient filtering-out of vibration
– Stable and reproducible results
– Excellent readability under any
lighting conditions
– Rugged, durable weighing system
– Approved for use in Category
2 and 3 hazardous areas/locations
(Zones 1 and 2, Class 1, Divisions 1
and 2 hazardous areas/locations)
(models PMA 7200-XCEV3,
PMA 7500-X, PMA7500-X..,
PMA 7500D-X and 7500D-X..
in conformity with EU Council
Directive 94/9/EEC, marked with
the codes EEx ib IIB T4 and II 2G,
approval certificate no. KEMA
98ATEX0609X and 99ATEX3013X)
– Model
609308-01 and
609308-21
AC adapters or power supplies
are marked with the code [EEx ib]IIB
and may only be installed as
associated electrical apparatus
outside the hazardous area/
location (PTB
*
approval certificate
no. EX–92.C2151)
*
Physikalisch-Technische Bundes-
anstalt = German Federal Institute
of Physics and Metrology
To Next Page
Loading...
Need help?
General
