Need help?Do you have a question about the Sartorius Portable PT 120-000V1 and is the answer not in the manual?
Explains common error codes displayed and their meanings.
Outlines the steps for adjusting the balance/scale's performance.
Procedure to switch the balance/scale into the gross value mode.
Procedure to verify the correct functioning of the overload stop.
Instructions for setting the overload stop to its correct position.
How to verify if the zero point offset is within tolerance.
Detailed steps for adjusting the zero point offset using resistors.
Procedure to test balance accuracy with off-center weights.
Procedure to verify the balance's linearity across its weighing range.
Steps for correcting linearity errors using balancing resistors.
To Next Page
General