Need help?Do you have a question about the Sartorius Portable PT 210-000V1 and is the answer not in the manual?
General| Capacity | 210 g |
|---|---|
| Readability | 0.001 g |
| Linearity | ±0.002 g |
| Calibration | External |
| Power Supply | AC adapter or 4 AA batteries |
| Display | LCD |
| Repeatability | ±0.001 g |
| Stabilization Time (typical) | 2 seconds |
| Interface | RS-232C |
Procedure to verify the correct function of the overload stop.
Steps to set the overload stop to its correct position.
Procedure to verify the zero point offset value.
Procedure to test balance performance with off-center loads.
Procedure to verify balance linearity across its weighing range.
To Next Page