Need help?Do you have a question about the Sartorius Portable PT 6-000V1 and is the answer not in the manual?
General| Capacity | 6 kg |
|---|---|
| Readability | 0.1 g |
| Interface | RS-232 |
| Calibration | External |
| Power Supply | AC adapter |
| Weight | 1.2 kg |
Lists required tools and equipment for balance/scale servicing.
Guidelines for handling and operating balances/scales during service operations.
Explains the function of each key on the balance/scale interface.
Describes the initial startup sequence and lists/explains common error codes.
Guide to accessing and changing menu code settings for various parameters.
Detailed overview of menu options and their corresponding functions.
Outlines the order of adjustment steps and instructions for opening the balance housing.
Procedure to check and adjust the overload stop for safety and proper function.
Details on checking and adjusting the zero point offset for accurate readings.
Procedure for checking balance performance when load is off-center and adjustment.
Steps for correcting linearity errors using balancing resistors.
Explains calibration in weighing mode and gross value mode.
Detailed steps for replacing the main printed circuit board.
Instructions for replacing the weighing system module.
Lists and visually identifies test points for troubleshooting the balance.
Steps for installing the data interface and its general specifications.
Details on data output format, parameters, and pin assignments.
To Next Page