Sartorius WZA N Series - Menu Structure (Overview)

17
Menu Structure (Overview)
Level 1 Level 2 Level 3 Codes
Setup Bal.Scal. Ambient Ambient conditions (Adapt filter) 1. 1. 1.
(Weigh cell functions) App.Filt. Application filter 1. 1. 2.
Stab.Rng. Stability range 1. 1. 3.
St.Del. Stability delay 1. 1. 4.
Taring Taring 1. 1. 5
AutoZer. Auto zero 1. 1. 6
Wt.Unit Basic weight unit 1. 1. 7.
Display Display accuracy 1. 1. 8.
Cal./adj. Function of the Q key 1. 1. 9.
Cal.routine 1. 1.10.
Cal.Unit Weight unit for calibration 1. 1.11.
Zero RNG. Zero range 1. 1.12.
Zero.on Zero at Power On 1. 1.13.
on.tare Tare/zero at power: 1. 1.14.
Interf. Interface Baud Baudrate 1. 5. 1.
parity Parity 1. 5. 2.
Stop bit Number of stop bits 1. 5. 3.
Handshk. Handshake mode 1. 5. 4.
Data bit Number of data bits 1. 5. 5.
dat.prot. SBI (ASCII) or printout 1. 5. 6.
Dat.Rec. (Print) Print (manual/automatic) 1. 6. 1.
Stop automatic printing 1. 6. 2.
Aut.Cycl. Time-dependent autom. printing 1. 6. 3.
tar./prt. Tare bal./scale after ind. print 1. 6. 4.
Prt.Init. Printout of appl. parameters 1. 6. 5.
Format Line format for printout 1. 6. 6.
GLP ISO/GLP-compliant printout 1. 6. 7.
time� 12h/24h 1. 6. 8.
date format 1. 6. 9.
Extras Menu Can Edit / Can change settings 1. 8. 1.
(Additional functions) Horn Acoustic Signal 1. 8. 2.
Keys (Keypad) 1. 8. 3.
Ext.Key External switch function 1. 8. 4.
On Mode Power-on mode 1. 8. 5.
Backlit Display backlighting 1. 8. 6.
Reset Menu Factory settings 1. 9. 1.
Applic. Weigh 2. 1.
Application Unit Toggle Display Display accuracy 2. 2. 2.
programs Counting resolut. 2. 3. 1.
Ref.Updt. Auto reference updating 2. 3. 2.
percentweighing Dec.Plcs Decimal places 2. 4. 1.
net.tot.Net total Comp.Prt. Printout of components 2. 5. 1.
Total Totalizing Comp.Prt. Printout of components 2. 6. 1.
AnimalW. Animal weighing Activty. Animal activity 2. 7. 1.
start 2. 7. 2.
Calc. Calculation Method (Operator) 2. 8. 1.
Dec.Plcs Decimal places 2. 8. 2.
Density determination Dec.Plcs Decimal places 2. 9. 1.
Input Input ID no. ID input; max. 7 characters 3. 1.
InFoInformation Version , Ser. No. , model
Displays software vers., serial no., model 4. 1./.2./.3.
Language English (factory setting) 5. 1.
(Languag.) Deutsch (German) 5. 2.
franc. (French) 5. 3.
ital. (Italian) 5. 4.
Espanol (Spanish) 5. 5.
PyCCK (Russian) 5. 6.
Polski (Polish) 5. 7.
codes Menu shows codes (not texts) 5. 8.