
Do you have a question about the Sartorius BIOHIT Picus and is the answer not in the manual?
| Type | Electronic Pipette |
|---|---|
| Number of Channels | Single and multichannel versions available (8 or 12 channels) |
| Power Supply | Lithium-ion battery |
| Operating Modes | Pipetting, Dispensing, Reverse Pipetting, Multi-Dispensing, Diluting |
| Programmable Functions | Yes, customizable protocols |
| Connectivity | Bluetooth |
Specifies the intended applications for the electronic pipette and recommended tip usage.
Details the components and labels of the single and multichannel pipette models.
Lists all items included in the box for the Picus electronic pipette.
Provides instructions on how to charge the electronic pipette using AC-adaptor or charging stand.
Details the procedure for turning the pipette on and its power-saving modes.
Explains the air displacement principle, DC-motor, and electronic controls of the pipette.
Introduces the eight pipetting modes and five mode-related additions available on the pipette.
Details the various programming modes and their specific functionalities.
Details the forward pipetting mode, its settings, and additional functions like Counter, Mixing, Tracker.
Explains the reverse pipetting mode for viscous or foaming liquids and its additional features.
Describes the multi-dispensing mode for repetitive dispensing of equal volumes.
Details manual pipetting where piston movement is controlled by the adjustment wheel.
Explains the diluting mode, which aspirates and dispenses two liquids separated by an air gap.
Describes sequential dispensing for repetitive volumes in a desired order.
Explains the multi-aspirating mode for repeated aspirations before a single dispense.
Details the titrate mode where aspiration is automatic and dispensing is manual.
Explains the Tracker for microplate dispensing and the Counter for pipetting cycles.
Describes how to adjust the pipette's calibration in 1, 2, or 3 points.
Details how to adjust sound settings for the adjustment wheel and notifications.
Explains how to adjust the display backlight for optimal viewing contrast.
Describes how to personalize the liquid handling device by setting a user ID.
Provides information on the date of the last service/calibration and the next due date.
Details how to reset all user settings and programming to factory defaults.
Shows software version and battery charging level, not editable by the user.
Provides general guidelines for cleaning and decontaminating the electronic pipette.
Details the cleaning procedure for the outer surface and specific parts of single-channel pipettes.
Explains cleaning for multichannel pipettes, noting lower part service by authorized personnel.
Covers methods for sterilizing pipette components, including autoclaving, UV, and disinfection.
Provides instructions for sterilizing pipette lower parts via autoclaving at 121°C.
Describes the process of UV sterilization for the electronic pipettes.
Details disinfection procedures for single and multichannel pipette parts using chemical solutions.
Outlines the step-by-step procedure for weighing to test pipette performance.
Recommends replacement of the pipette battery by authorized service personnel.
Advises contacting the manufacturer for original spare parts.
Provides recommendations for storing the electronic pipettes, especially during long periods.
Details the two-year warranty coverage and conditions for the electronic pipettes.
Provides guidance on the proper disposal of the device according to European directives.
Explains how to force a reset on an unresponsive pipette without losing settings.
Lists common problems, their possible causes, and solutions for the electronic pipette.
Provides technical specifications for the pipette's rechargeable battery.
Lists technical data for the AC-adaptors and charging stands.
Details technical specifications for the Picus electronic pipette, including operating temperature and humidity.
Presents detailed performance specifications for single, 8-channel, and 12-channel pipettes.
Provides a table showing pipetting speeds in seconds for different volumes and speeds.











