9
Hot key
All Picus models include 10 memory places for the favourite and most used
pipetting settings.
Storing the programme in the memory place
1. Programme the pipetting mode and press the hot key. List of memory
places opens.
2. Choose the desired memory location by turning the adjustment wheel.
3. Press SAVE.
4. Activate the name editor by pressing the operation button.
5. Turn the adjustment wheel to change the characters and press the
operating button to confirm the selection. Middle soft key changes the
characters/numbers/symbols and operating button or OK in right soft key
confirms the setting.
6. Move to the next character by turning the adjustment wheel. Proceed as
described above until all characters are set.
7. Save the programme name by pressing SAVE.
CLEAR: Erases the character
BACK: Cancels the overwriting
OK: Confirms the selection
Activating the programme from the memory place
1. Press the hot key and choose the programme by turning the adjustment
wheel.
2. Press the operating button or OK to activate saved programme.
3. The pipette is now ready for pipetting. The memory place indicator is
displayed next to the mode name.
3.2 Pipetting modes
Picus electronic pipette has eight (8) pipetting modes and five (5) mode
related additions.
Main mode –
available in all Picus
models
Additional functions – to be used in conjunction with the main mode
Tracker Mixing Counter Excess Volume
Adjustment
Auto Dispensing
(Timed)
Pipetting • • •
Reverse
Pipetting • • •
Manual
Pipetting
Multi Dispensing • • •
Diluting
•
Sequential Dispensing
•
Multi Aspiration
Titrate
M10 indicates that 300 μl pipetting has been
saved on memory place 10.
To Next Page
Loading...
Need help?
General
