13
can be adjusted according to the pipette’s maximum volume.
3.3.6 Sequential Dispensing
Dispenses repetitively different volumes in any desired order. Useful mode for
example dilution series and in making the calibration curves.
– Select Seq. Disp. in menu. Seq. Disp. mode is activated with the latest
settings.
– Aspirate the liquid into the tip and dispense in set aliquots.
– After last dispensing double click operating button to empty the tip or press
NO to continue dispensing without emptying the tip.
– Editing the mode:
– Press EDIT (the middle soft key) or turn the adjustment wheel to the
end. Parameter background colour is highlighted to indicate that the
editing mode has been activated.
– Turn the adjustment wheel to set the numbers. Confirm the setting by
pressing the operating button or OK.
– Press NEXT (the middle soft key) to move the cursor to the next
parameter to be edited.
– Press BACK to return to the previous screen without saving the changes.
– Confirm the setting by pressing the operating button or OK.
Additional features
Excess adjustment can be used in conjunction with Sequential dispensing.
– Press ADV (the right soft key) to activate extra features.
– Excess adjustment can be used to set the excess volume. When
activated, the excess volume is set to default.
Turn the adjustment wheel to reset the excess volume and confirm the
setting by pressing the operating button. Maximum excess volume is set
as default and can be only decreased from default.
3.3.7 Multi-Aspirating
Select the volume and the number of aspirations desired. Repeat the
aspiration until the series is completed, then discard the full aspirated volume
in a single step. Multi-Aspirating is a useful mode for example for sample
pooling and microplate washing.
– Select Multi-Aspirating. in menu. Multi Asp. mode is activated with the
latest settings.
– Start pipetting by pressing operating button. Pipette aspirates the volumes
set by the user in any desired order to the tip.
– Dispense the liquid from the tip to the receiving vessel.
– Editing the mode:
– Press EDIT (the middle soft key) or turn the adjustment wheel to the
end. Parameter background colour is highlighted to indicate that the
editing mode is activated.
– Turn adjustment wheel to set the numbers. Confirm the setting by
pressing operating button or OK.
– NEXT in the middle soft key moves the cursor to the next parameter to
be edited.
– BACK returns to the previous screen without saving the changes.
– Confirm the setting by pressing the operating button or OK.
NOTE! No additional functions are available for Multi-Aspirating.
3.3.8 Titrate
Aspirates the selected volume automatically. Dispensing is manually
controlled by the user.
To Next Page
Loading...
Need help?
General
