Sartorius WZA224-ND - Page 19

19
Level 1 Level 2 Level 3 Level 4 Code
Setup Interf. Baudrate 600 1. 5. 1. 3
Interface ο 1200 1. 5. 1. 4
2400 1. 5. 1. 5
4800 1. 5. 1. 6
9600 1. 5. 1. 7
19200 1. 5. 1. 8
ο 38400
(factory-set on WZA224-ND) 1. 5. 1. 9
Parity ο Odd 1. 5. 2. 3
Parity Even 1. 5. 2. 4
None 1. 5. 2. 5
stop bit Number ο 1 Stop 1. 5. 3. 1
of stop bits 2 stop 1. 5. 3. 2
Handshk. Softw. Software 1. 5. 4. 1
Handshake mode ο Hardw. Hardware 1. 5. 4. 2
None 1. 5. 4. 3
data bit Number ο 7 bits 1. 5. 5. 1
of data bits 8 bits 1. 5. 5. 2
dat.rec. Com- ο SBI (ASCII)
1
) 1. 5. 6. 1
munication mode printer (GLP-compliant record) 1. 5. 6. 2
XBPI 1. 5. 6. 4
dat.rec. print Manual without stability 1. 6. 1. 1
(Printout) (manual/ ο man.with. stability 1. 6. 1. 2
automatic) auto.w/o. stability 1. 6. 1. 3
Aut.With stability 1. 6. 1. 4
Ld.Chnge Autom. after load change 1. 6. 1. 5
Stop auto- ο off Not possible 1. 6. 2. 1
matic printing On Cancel with r 1. 6. 2. 2
Aut.Cycl. ο eachval (1 display update) 1. 6. 3. 1
Time-dependent After 2 (2 display updates) 1. 6. 3. 2
autom. printing
tar./prt. ο off 1. 6. 4. 1
Tare bal./scale on 1. 6. 4. 2
after ind. print
1
) Note concerning verified balances/scales as legal measuring instruments in the EU*:
In the setting “SBI”, the non-verified display digit is not automatically identified.
Please take the corresponding measures or adjust the settings on the peripheral device.