Need help?Do you have a question about the Sartorius eLINE and is the answer not in the manual?
General| Brand | Sartorius |
|---|---|
| Model | eLINE |
| Category | Laboratory Equipment |
| Language | English |
Overview of eLINE® electronic pipettes, highlighting technology, ergonomics, accuracy, and user-friendliness.
Details specifications for single, 8-channel, and 12-channel eLINE® pipettes including order codes and volume ranges.
Recommends Sartorius pipette tips for optimal performance and accuracy with eLINE® pipettes.
Explains the pipette's display elements and the function of keyboard and operating buttons.
Describes how to reset the pipette, including the automatic home position determination.
Explains the function of the start button for aspiration and dispensing operations.
Details the tip sealing mechanism and the electronic tip ejection feature.
Explains the purpose and types of Safe-Cone Filters and their role in preventing contamination.
Describes the process of charging the pipette using Sartorius charging stands and carousels.
Details the procedure for directly charging the pipette using the AC-adaptor.
Lists the electrical specifications for the battery and AC-adaptors used with the pipette.
Visual representation of the eLINE® pipette's programming flow and operating mode selection.
Instructions on how to adjust the dispensing and aspiration speed of the pipette.
Detailed steps for using SP, P, and P+MIXING pipetting modes.
Step-by-step guide for performing reverse pipetting (rP) to dispense a specific volume with excess liquid.
Instructions for using the P COUNT mode with blow-out and a displayed cycle counter.
Explanation of manual pipetting control and volume display in P MANUAL mode.
Steps for performing repetitive dispensing of selected volumes with excess aspirate.
Instructions for diluting liquids with or without mixing, using an air gap.
Guide to dispensing a series of different volumes of the same solution in a desired order.
Steps for performing consecutive aspiration operations, useful for microwell plates or sample pooling.
Instructions for automatic dispensing at specified intervals with excess aspirate.
Procedure for saving customized operating modes into storage locations (Prog 1-6).
Steps to retrieve previously stored operating modes from the Prog 1-6 locations.
Advice on dispensing with the blow-out function, ensuring proper piston return.
Recommendations for dispensing in modes without blow-out, suggesting tip placement.
General tips for pipetting technique, handling, and environmental conditions.
Instructions for daily cleaning of the pipette's exterior using disinfectant or detergent.
Procedure for cleaning, decontaminating, and greasing the lower part of single-channel pipettes every three months.
Methods for sterilizing pipette parts using autoclaving, UV, or disinfectants.
Detailed instructions for autoclaving lower parts of eLINE® pipettes at 121°C.
Guidance on using UV sterilization for eLINE® pipettes, with notes on potential effects.
Step-by-step guide for replacing the battery pack in the eLINE® pipette.
Recommendations for storing the eLINE® pipette when not in use, including charging stand and battery removal.
Information on recalibrating the eLINE® pipette and the conditions required.
To Next Page