15
7.1. Super Pipetting (SP), Pipetting
mode (P) and Pipetting With
Mixing (P+MIXING)
1. Press to display PIPET
2. Scroll with
until the symbol SP, P or P+MIXING
is displayed.
3. Confirm by pressing
4. Select the desired pipetting volume by using the
NOTE: When holding down the the volume display
starts to scroll faster.
5. Press
to confirm selection and to display the
speed in or press
and continue from Step
10.
6. Select the speed in with
(1= Min and 9 =
Max)
7. Press
or to confirm selection and to
display the speed out
8. Select the speed out with
(1= Min and 9 =
Max)
9. Press
or to confirm selections
10. Position the tip to aspirate and press the START
button
11. Position the tip to dispense. Press the START
button
to dispense the sample. The tip is
emptied with blow-out and the piston returns
automatically back to the home position.
NOTE: When the START button is held down during
dispensing the piston will stop in the lowest position.
When the start button is released the piston will
automatically return to the home position.
To Next Page
Loading...
Need help?
General
