22
10. Select the speed out with (1= Min and 9 =
Max)
11. Press
or to confirm selections
12.
Position the tip to aspirate the volume 1 and press
the START button
13. With the tip in the air press the START button
again to aspirate an air gap
14. Position the tip to aspirate the volume 2 and press
the START button
15. Position the tip to dispense and press the START
button
To mix:
1.
Position the tip in to the solution, then press and hold
the START button
The mixing is performed automatically as long as
the START button
is held down.
2. Release the START button and position the tip to
dispense.
3. Empty the tip by pressing the START button twice
NOTE: The mixing is performed with about 70% of the
total volume.
8.3. Sequenced dispensing (Sd)
A series of different volumes of same solution can be
delivered in any desired order. The sum of dispensed
volumes can not exceed the nominal volume of the
pipette.
1. Press
to display MULTI
2. Scroll with
until the symbol Sd is displayed.
3. Confirm by pressing
To Next Page
Loading...
Need help?
General
